Concrete is one of the most popular surfaces for commercial and residential use in Henry County Georgia. Because of its durability and low maintenance, homemakers prefer it to other outdoor surface materials.
However, like everything else that is constantly exposed to adverse weather conditions, concrete deteriorates over time. Since you first installed the concrete, it looked positively new. After a few years, what was once shiny gray surface had turned into a dull, monotonous gray.
Other than tearing out the whole concrete surface and replacing it with a new one (which can be an expensive endeavor, not to mention physically taxing), your other option is patio concrete staining. Hiring a professional decorative concrete contractor in Henry County to repair and resurface the concrete if it needs it is well worth the money.
Once the concrete is ready for its first application you have to choose from either acid stains or acrylic stains. Both can greatly enhance the appearance of your concrete surfaces. However, each stain type has its own character and distinction from the other, so it is best if you get to know what the strong and weak points of each type are before making a decision.
What makes outdoor concrete staining using acid stains unique is that every acid type reacts different to the free lime. So you can create different effects, producing an illusion of variety on your surfaces.
The other type of stain used for outdoor concrete staining is acrylic. Because acrylic stains are water-based, the pigments tend to enter through the pores of the concrete surface. In this way, the color, which is characteristically semi-translucent adheres to the concrete in a way that acid stains never do, creating a more lasting and consistent coloring.
The good thing about acrylic stains for outdoor concrete staining is that they can mask any flaws or inconsistencies in the surface. Acid stains, on the other hand, tend to accentuate them.
Concrete Repairs - How to Go About It
Though I normally espouse the wonders and joys of decorative concrete applications, I feel I should also inform about the other side of the coin: no matter what the color or stamp design reflects, it is still concrete. Your new patio may look like a gorgeous slate, but it is not. It is concrete. What does this mean? Well, it means that although concrete has limitless design options and can me formed into almost any design, mimicking many other building materials; it does have minor limitations. A seasoned decorative concrete contractor in [post_name] knows this, and will install the concrete according to industry standards in order to best prevent cracks or color mishaps.
That said, these issues do arise on occasion. Let us begin with cracks in your brand new stamped concrete pool deck. Firstly, expansion joints are cut into the concrete to prevent cracks from occurring. However, everything from heavy loads travelling on the stamped concrete to land settlement underneath the concrete can cause a crack regardless of expansion joints. Proper cutting of the joints should alleviate this issue, and more often than not, it will. Secondly, when concrete cures it shrinks. This can cause cracks as well and even the most experienced concrete contractor cutting the best expansion joints in the world will not always win that battle. Lastly, a somewhat common "side effect" of stamped concrete is hairline cracks forming around the lines made by the stamping tools once the surface begins to harden. This is called "crusting" and typically will occur due to sun and wind. Obviously, sun and wind will quicken the hardening of the concrete surface. Another reason crusting occurs is due to the color of the concrete. Darker colors, as we all know, draw the sun's rays and absorb the heat. Stamping tools with deeper grout lines for creating designs like random stone or slate patterns often aggravate the crusting. Many people feel that these hairline cracks add to the look of the stamped concrete design, giving it an "Old World" look. This aged appearance typically lends to the overall design. These imperfections are generally thought of as appealing. Although cracks can be repaired, the end result of the repair tends to be much more obvious than the unrepaired crack.
Obviously, nobody wants to spend their hard earned cash on a concrete job that they feel is imperfect. As with any significant home improvement purchase, proper research on decorative concrete applications will school you on what to expect in terms of installation, appearance, design, maintenance, and repair. The most important aspect of this article is the desire to make the customer happy by keeping the lines of communication open between you, the homeowner, and your [post_name] concrete contractor; as well as preparing you with important knowledge to consider when designing your concrete project.
Concrete Repair - Do It Yourself
Concrete stamping or stamped concrete can be used to describe the patterning that is associated with concrete so as to be able to resemble different textures or designs like those of the brick, flag stone etc. this method has been proved to be less expensive as it is made to resemble other building materials meaning that not will not be necessary to buy such materials. Instead one can us the stamping method to create likeliness to these kinds of materials.
Concrete stamping began in the year 1970. This is when most new designs and innovations in different areas of our lives began. The installation process entails a few processes. You can start by doing something interesting at the door steps that lead you to your house. This can be done by use various welcoming notes. First before you start any stamping guide, be sure to come up with a plan that will be beneficial and practical to everyone involved. If you want to do the stamping yourself, your plan should be considerate of the people who live around you. Also you should be able to work at times that will not inconvenience the members of your family if you happen to have any.
There are different ways one can go about when wanting to do concrete stamping. However, the two separate ways can be by either do it yourself plans and by hiring professionals to do it. Since most of us have never known how to go about concrete stamping, we are more likely to choose professionals to go about it. You should do a research of the construction companies that exist in your area so as to be able to decide which company that you will choose. Before you jump and choose the cheapest company in [post_name] available to you, be sure to do an in depth research on it. Feel free to inquire what experience they have in regards to years. How many such jobs have they done and if they have done such a job before do they have photos that can back up the credibility they are talking of?
Concrete stamping is a concept that some construction companies have yet to adapt into their system. Therefore, you will find that those that are hearing of the concept for the first time are ready and willing to adapt it into their system. At the same time, there are those who you will find that they will not have understood the concept but at the same time will jump at any chance of doing the job. This is why it is always advisable to have a thorough research of a company before you choose it for any provision of goods and services. Once you have made the necessary inquiries on the different companies, you will be able to choose one that will not be a disappointment to you. You can have them do the stamping in a way that will be very close to the total out look of your house. If you have no ideas on fashion and design, consult them as they will be able to show you how to go about this venture in a way that will be satisfactory to you.