Concrete is one of the most popular surfaces for commercial and residential use in Georgia Georgia. Because of its durability and low maintenance, homemakers prefer it to other outdoor surface materials.
However, like everything else that is constantly exposed to adverse weather conditions, concrete deteriorates over time. Since you first installed the concrete, it looked positively new. After a few years, what was once shiny gray surface had turned into a dull, monotonous gray.
Other than tearing out the whole concrete surface and replacing it with a new one (which can be an expensive endeavor, not to mention physically taxing), your other option is patio concrete staining. Hiring a professional decorative concrete contractor in Georgia to repair and resurface the concrete if it needs it is well worth the money.
Once the concrete is ready for its first application you have to choose from either acid stains or acrylic stains. Both can greatly enhance the appearance of your concrete surfaces. However, each stain type has its own character and distinction from the other, so it is best if you get to know what the strong and weak points of each type are before making a decision.
What makes outdoor concrete staining using acid stains unique is that every acid type reacts different to the free lime. So you can create different effects, producing an illusion of variety on your surfaces.
The other type of stain used for outdoor concrete staining is acrylic. Because acrylic stains are water-based, the pigments tend to enter through the pores of the concrete surface. In this way, the color, which is characteristically semi-translucent adheres to the concrete in a way that acid stains never do, creating a more lasting and consistent coloring.
The good thing about acrylic stains for outdoor concrete staining is that they can mask any flaws or inconsistencies in the surface. Acid stains, on the other hand, tend to accentuate them.
Repairing Broken Concrete
Repairing broken concrete can require some heavy equipment and good strong labor depending on how large the area is that needs to be repaired. This example will be based on a badly damaged driveway or perhaps garage floor. If you do not have a truck available to haul away the damaged concrete, a dumpster may be the cheapest means of removal from the site. Many carters will provide a twenty cubic yard for this debris as long as only pure concrete is placed in the dumpster. The carters trucks can easily lift a dumpster that size filled to water level and they can resell the broken concrete to a local landfill for roads or someone using it for fill materials. Reinforcing bars and wire must be removed as much as possible and absolutely no household garbage of any kind is allowed.
Concrete floors and driveways will require the use of a jack hammer to break the concrete into workable sized pieces. Small areas may be done with an electric hammer but thick reinforced slabs and large areas are going to require the use of an air compressor driven hammer or hammers.
Rental shops will have a tow behind unit, hoses and hammers with bits. Ninety pound hammers are the best but they are a bear to handle. Sixty pound hammers are available but of course will not do the work of the bigger hammers. The larger the jack hammer, the faster the demolition work will proceed. Always wear eye and hearing protection when operating a jack hammer. Start by cracking the concrete at the furthest edge of work area away from the dumpster. You will then be able to run the wheelbarrow over a fairly smooth surface to the dumpster instead of over broken concrete or rough ground. If you are repairing or replacing only a portion of the concrete slab you will need to saw cut the slab before removal of the damaged concrete can begin. Using a cut-off saw with a concrete cutting blade, and as neatly as possible, cut a square around the damaged area. Try to penetrate all the way through the slab if possible. Cutting through will sever any reinforcing bars or wire mesh in the slab making removal of the debris much easier.
If you have some latex adhesive made for patching concrete you can paint the exposed face of the slab about one hour before you pour the new concrete. Just minutes before pouring the new concrete, wet the soil below the slab to prevent premature drying of the new concrete. Dry earth will suck all the water out of the fresh concrete much too quickly causing the concrete to shrink.
Pouring the concrete is the easiest and most rewarding part of the job. Once poured, try to prevent the fresh concrete from drying too quickly by placing a tarp over the area for shade or once set and finished, by keeping water over the area for a few days. Wet burlap works great and is easy to soak with a hose. Avoiding premature drying will prevent the patch from shrinking it's edges away from the existing floor edges, leaving an unsightly patch job.
Concrete Repair - Do It Yourself
Concrete stamping or stamped concrete can be used to describe the patterning that is associated with concrete so as to be able to resemble different textures or designs like those of the brick, flag stone etc. this method has been proved to be less expensive as it is made to resemble other building materials meaning that not will not be necessary to buy such materials. Instead one can us the stamping method to create likeliness to these kinds of materials.
Concrete stamping began in the year 1970. This is when most new designs and innovations in different areas of our lives began. The installation process entails a few processes. You can start by doing something interesting at the door steps that lead you to your house. This can be done by use various welcoming notes. First before you start any stamping guide, be sure to come up with a plan that will be beneficial and practical to everyone involved. If you want to do the stamping yourself, your plan should be considerate of the people who live around you. Also you should be able to work at times that will not inconvenience the members of your family if you happen to have any.
There are different ways one can go about when wanting to do concrete stamping. However, the two separate ways can be by either do it yourself plans and by hiring professionals to do it. Since most of us have never known how to go about concrete stamping, we are more likely to choose professionals to go about it. You should do a research of the construction companies that exist in your area so as to be able to decide which company that you will choose. Before you jump and choose the cheapest company in [post_name] available to you, be sure to do an in depth research on it. Feel free to inquire what experience they have in regards to years. How many such jobs have they done and if they have done such a job before do they have photos that can back up the credibility they are talking of?
Concrete stamping is a concept that some construction companies have yet to adapt into their system. Therefore, you will find that those that are hearing of the concept for the first time are ready and willing to adapt it into their system. At the same time, there are those who you will find that they will not have understood the concept but at the same time will jump at any chance of doing the job. This is why it is always advisable to have a thorough research of a company before you choose it for any provision of goods and services. Once you have made the necessary inquiries on the different companies, you will be able to choose one that will not be a disappointment to you. You can have them do the stamping in a way that will be very close to the total out look of your house. If you have no ideas on fashion and design, consult them as they will be able to show you how to go about this venture in a way that will be satisfactory to you.