Concrete is one of the most popular surfaces for commercial and residential use in Peachtree Corners Georgia. Because of its durability and low maintenance, homemakers prefer it to other outdoor surface materials.
However, like everything else that is constantly exposed to adverse weather conditions, concrete deteriorates over time. Since you first installed the concrete, it looked positively new. After a few years, what was once shiny gray surface had turned into a dull, monotonous gray.
Other than tearing out the whole concrete surface and replacing it with a new one (which can be an expensive endeavor, not to mention physically taxing), your other option is patio concrete staining. Hiring a professional decorative concrete contractor in Peachtree Corners to repair and resurface the concrete if it needs it is well worth the money.
Once the concrete is ready for its first application you have to choose from either acid stains or acrylic stains. Both can greatly enhance the appearance of your concrete surfaces. However, each stain type has its own character and distinction from the other, so it is best if you get to know what the strong and weak points of each type are before making a decision.
What makes outdoor concrete staining using acid stains unique is that every acid type reacts different to the free lime. So you can create different effects, producing an illusion of variety on your surfaces.
The other type of stain used for outdoor concrete staining is acrylic. Because acrylic stains are water-based, the pigments tend to enter through the pores of the concrete surface. In this way, the color, which is characteristically semi-translucent adheres to the concrete in a way that acid stains never do, creating a more lasting and consistent coloring.
The good thing about acrylic stains for outdoor concrete staining is that they can mask any flaws or inconsistencies in the surface. Acid stains, on the other hand, tend to accentuate them.
Using decorative concrete resurfacing is a wonderful way to make your house in [post_name] more attractive and sophisticated looking, without incurring much expense at all. In fact, decorative concrete resurfacing is an extremely affordable way to spruce up your home, and many of the decorative concrete resurfacing options available today are so nice that most people can't even tell the design was done with concrete.
Some decorative concrete resurfacing is designed to specifically mimic some other natural stone form. You can use decorative concrete resurfacing on your driveway for instance, to make it appear as if it's made of a pretty brick design. Decorative concrete resurfacing is also used to create designs which look like old castle stone, or cobble stones too.
Decorative concrete resurfacing is also used indoors quite often, because it can be used to create the look of marble for instance. Decorative concrete resurfacing can even be used as a way to create expensive looking tile designs too, all made out of concrete.
Another way to use decorative concrete surfacing is on the floor inside your home too. Since the decorative concrete surfacing techniques can make the surface look like almost anything you desire, such as cobblestone, expensive tiles, mosaics and even murals, you can end up with a beautiful and unique floor inside your home that will stand the wear of time.
Surfaces created with decorative concrete resurfacing techniques can be treated in various ways too. If you had decorative concrete resurfacing done on the floors of your home in a mosaic tile design for instance, you should have a nice glossy finish coat put on the design to both help the floor stay looking new longer, and to help the floor look even more decorative too.
Repairing small cracks in Concrete
Clean out the crack with a wire brush to remove dirt and loose stones. Wash the crack with a concrete cleaner. Get commercially available nonacid concrete cleaner made by the same company that makes your patching compound. It is safer and more convenient than the large of muriatic acid masons might use.
Let the surface dry. If the crack is deep and it is in a floor, fill it partially with sand, leaving an opening about 1/4 to 1/2 inch deep. Pour in the crack sealer until it forms a layer 1/4 inch deep. Let it dry overnight and then apply another layer. Repeat until the surface is flush with the floor. Do not overfill, apply enough patch material to bring the surface flush with the floor. If using caulk, smooth with a metal putty knife.
On deeper cracks, mix some sand mix according to the direction on the bag. Trowel it into the cracks, filling it flush with the surface. First, the patch on both deep and shallow cracks will have a watery sheen. When the sheen dries off, se a wooden float to smooth the surface and give it a texture that matches the rest of the concrete. If the existing concrete is very smooth, then smooth the surface with a metal finishing trowel.