Concrete is one of the most popular surfaces for commercial and residential use in Duluth Georgia. Because of its durability and low maintenance, homemakers prefer it to other outdoor surface materials.
However, like everything else that is constantly exposed to adverse weather conditions, concrete deteriorates over time. Since you first installed the concrete, it looked positively new. After a few years, what was once shiny gray surface had turned into a dull, monotonous gray.
Other than tearing out the whole concrete surface and replacing it with a new one (which can be an expensive endeavor, not to mention physically taxing), your other option is patio concrete staining. Hiring a professional decorative concrete contractor in Duluth to repair and resurface the concrete if it needs it is well worth the money.
Once the concrete is ready for its first application you have to choose from either acid stains or acrylic stains. Both can greatly enhance the appearance of your concrete surfaces. However, each stain type has its own character and distinction from the other, so it is best if you get to know what the strong and weak points of each type are before making a decision.
What makes outdoor concrete staining using acid stains unique is that every acid type reacts different to the free lime. So you can create different effects, producing an illusion of variety on your surfaces.
The other type of stain used for outdoor concrete staining is acrylic. Because acrylic stains are water-based, the pigments tend to enter through the pores of the concrete surface. In this way, the color, which is characteristically semi-translucent adheres to the concrete in a way that acid stains never do, creating a more lasting and consistent coloring.
The good thing about acrylic stains for outdoor concrete staining is that they can mask any flaws or inconsistencies in the surface. Acid stains, on the other hand, tend to accentuate them.
Epoxy is known as a very durable type of glue providing users with high levels of bonding properties. Epoxy is seen as something that is much more superior to most paste style glues. The components of epoxy are sold in two packages that require mixing prior to use. These components are resins and hardeners. Many industrial and commercial buildings use epoxy flooring in their building facilities because of the numerous the cost saving and safety benefits it provides to users.
While concrete is seen as virtually indestructible, it is not impervious to certain types of damage, including cosmetic, such as scuffing, cracking and staining. This can ruin the overall attractiveness of the floor. Concrete is porous and can absorb dirt, salt, chemicals and oils, making it difficult to clean the concrete floors properly. By applying an epoxy coating on the concrete, the concrete is protecting. Epoxy flooring has a high-gloss finish that can increase light reflectivity by 200%. It will seal the porous concrete surface and render it stain proof. Epoxy flooring is also very simple to clean because there is nothing for pollutants to hang onto.
Epoxy coating for floors are also very inexpensive compared to other types of floor finishes including carpeting, tile, wood and vinyl. Poly urea pains typically cost up to four times the amount of epoxy flooring and homeowners or business owners do not see any benefits of from the increased cost. It is extremely economical and because it is durable, epoxy flooring is a lasting investment. Men and women will not need to do constant touch up jobs because of its long lasting effects.
Finally, flooring coatings are very simple to clean and maintain. The impact from traffic,oil, salt and chemicals in garages, commercial and industrial facilities are difficult to remove and costly to repair if untreated. It is not only frustrating and time consuming, but also can be very expensive.
Repairing small cracks in Concrete
Clean out the crack with a wire brush to remove dirt and loose stones. Wash the crack with a concrete cleaner. Get commercially available nonacid concrete cleaner made by the same company that makes your patching compound. It is safer and more convenient than the large of muriatic acid masons might use.
Let the surface dry. If the crack is deep and it is in a floor, fill it partially with sand, leaving an opening about 1/4 to 1/2 inch deep. Pour in the crack sealer until it forms a layer 1/4 inch deep. Let it dry overnight and then apply another layer. Repeat until the surface is flush with the floor. Do not overfill, apply enough patch material to bring the surface flush with the floor. If using caulk, smooth with a metal putty knife.
On deeper cracks, mix some sand mix according to the direction on the bag. Trowel it into the cracks, filling it flush with the surface. First, the patch on both deep and shallow cracks will have a watery sheen. When the sheen dries off, se a wooden float to smooth the surface and give it a texture that matches the rest of the concrete. If the existing concrete is very smooth, then smooth the surface with a metal finishing trowel.