Concrete is one of the most popular surfaces for commercial and residential use in Sharpsburg Georgia. Because of its durability and low maintenance, homemakers prefer it to other outdoor surface materials.
Other than tearing out the whole concrete surface and replacing it with a new one (which can be an expensive endeavor, not to mention physically taxing), your other option is patio concrete staining. Hiring a professional decorative concrete contractor in Sharpsburg to repair and resurface the concrete if it needs it is well worth the money.
Repairing broken concrete can require some heavy equipment and good strong labor depending on how large the area is that needs to be repaired. This example will be based on a badly damaged driveway or perhaps garage floor. If you do not have a truck available to haul away the damaged concrete, a dumpster may be the cheapest means of removal from the site. Many carters will provide a twenty cubic yard for this debris as long as only pure concrete is placed in the dumpster. The carters trucks can easily lift a dumpster that size filled to water level and they can resell the broken concrete to a local landfill for roads or someone using it for fill materials. Reinforcing bars and wire must be removed as much as possible and absolutely no household garbage of any kind is allowed.
Concrete floors and driveways will require the use of a jack hammer to break the concrete into workable sized pieces. Small areas may be done with an electric hammer but thick reinforced slabs and large areas are going to require the use of an air compressor driven hammer or hammers.
Rental shops will have a tow behind unit, hoses and hammers with bits. Ninety pound hammers are the best but they are a bear to handle. Sixty pound hammers are available but of course will not do the work of the bigger hammers. The larger the jack hammer, the faster the demolition work will proceed. Always wear eye and hearing protection when operating a jack hammer. Start by cracking the concrete at the furthest edge of work area away from the dumpster. You will then be able to run the wheelbarrow over a fairly smooth surface to the dumpster instead of over broken concrete or rough ground. If you are repairing or replacing only a portion of the concrete slab you will need to saw cut the slab before removal of the damaged concrete can begin. Using a cut-off saw with a concrete cutting blade, and as neatly as possible, cut a square around the damaged area. Try to penetrate all the way through the slab if possible. Cutting through will sever any reinforcing bars or wire mesh in the slab making removal of the debris much easier.
If you have some latex adhesive made for patching concrete you can paint the exposed face of the slab about one hour before you pour the new concrete. Just minutes before pouring the new concrete, wet the soil below the slab to prevent premature drying of the new concrete. Dry earth will suck all the water out of the fresh concrete much too quickly causing the concrete to shrink.
Pouring the concrete is the easiest and most rewarding part of the job. Once poured, try to prevent the fresh concrete from drying too quickly by placing a tarp over the area for shade or once set and finished, by keeping water over the area for a few days. Wet burlap works great and is easy to soak with a hose. Avoiding premature drying will prevent the patch from shrinking it's edges away from the existing floor edges, leaving an unsightly patch job.
Concrete bases like driveways, floors and walkways get occasional cracks and dirty patches in due course of time. Who would not want to get a completely new looking concrete surface without installing a new one? Concrete repair methods can make it happen! They are easy to implement and you would not need any professional help.
Concrete restoration procedures can impart a more pleasing look to your concrete walkways, floors and steps. Besides, such methods do not require you to spend big bucks. You can get them done at quite cheap rates. In a few exceptional cases of extreme concrete damage, complete replacement is the only way out, but in most cases, you can avail to the concrete repair methods.
Here are a few general tips that you need to follow are:
* One should not attempt any concrete work under hot and dry weather conditions.
* To make it easier to clean the tools with which you have done a concrete repair, pass a propane torch over them.
* In order to create a stronger bond to an old concrete slab, you can consider adding acrylic fortifier to the cement mixture.
Sanitred.com products are the most reliable when it comes to concrete repair. They impart permanent flexibility to rule out the chances of future cracking and are equipped with many user-friendly qualities.