Concrete is one of the most popular surfaces for commercial and residential use in Powder Springs Georgia. Because of its durability and low maintenance, homemakers prefer it to other outdoor surface materials.
However, like everything else that is constantly exposed to adverse weather conditions, concrete deteriorates over time. Since you first installed the concrete, it looked positively new. After a few years, what was once shiny gray surface had turned into a dull, monotonous gray.
Other than tearing out the whole concrete surface and replacing it with a new one (which can be an expensive endeavor, not to mention physically taxing), your other option is patio concrete staining. Hiring a professional decorative concrete contractor in Powder Springs to repair and resurface the concrete if it needs it is well worth the money.
Once the concrete is ready for its first application you have to choose from either acid stains or acrylic stains. Both can greatly enhance the appearance of your concrete surfaces. However, each stain type has its own character and distinction from the other, so it is best if you get to know what the strong and weak points of each type are before making a decision.
What makes outdoor concrete staining using acid stains unique is that every acid type reacts different to the free lime. So you can create different effects, producing an illusion of variety on your surfaces.
The other type of stain used for outdoor concrete staining is acrylic. Because acrylic stains are water-based, the pigments tend to enter through the pores of the concrete surface. In this way, the color, which is characteristically semi-translucent adheres to the concrete in a way that acid stains never do, creating a more lasting and consistent coloring.
The good thing about acrylic stains for outdoor concrete staining is that they can mask any flaws or inconsistencies in the surface. Acid stains, on the other hand, tend to accentuate them.
Decorative Concrete - What You Should Know About Cracks & Color Variations
Repairing small cracks in Concrete
Clean out the crack with a wire brush to remove dirt and loose stones. Wash the crack with a concrete cleaner. Get commercially available nonacid concrete cleaner made by the same company that makes your patching compound. It is safer and more convenient than the large of muriatic acid masons might use.
Let the surface dry. If the crack is deep and it is in a floor, fill it partially with sand, leaving an opening about 1/4 to 1/2 inch deep. Pour in the crack sealer until it forms a layer 1/4 inch deep. Let it dry overnight and then apply another layer. Repeat until the surface is flush with the floor. Do not overfill, apply enough patch material to bring the surface flush with the floor. If using caulk, smooth with a metal putty knife.
On deeper cracks, mix some sand mix according to the direction on the bag. Trowel it into the cracks, filling it flush with the surface. First, the patch on both deep and shallow cracks will have a watery sheen. When the sheen dries off, se a wooden float to smooth the surface and give it a texture that matches the rest of the concrete. If the existing concrete is very smooth, then smooth the surface with a metal finishing trowel.
Concrete Repairs - How Long Will They Last?
Concrete bases like driveways, floors and walkways get occasional cracks and dirty patches in due course of time. Who would not want to get a completely new looking concrete surface without installing a new one? Concrete repair methods can make it happen! They are easy to implement and you would not need any professional help.
Concrete restoration procedures can impart a more pleasing look to your concrete walkways, floors and steps. Besides, such methods do not require you to spend big bucks. You can get them done at quite cheap rates. In a few exceptional cases of extreme concrete damage, complete replacement is the only way out, but in most cases, you can avail to the concrete repair methods.
Here are a few general tips that you need to follow are:
* One should not attempt any concrete work under hot and dry weather conditions.
* To make it easier to clean the tools with which you have done a concrete repair, pass a propane torch over them.
* In order to create a stronger bond to an old concrete slab, you can consider adding acrylic fortifier to the cement mixture.
Sanitred.com products are the most reliable when it comes to concrete repair. They impart permanent flexibility to rule out the chances of future cracking and are equipped with many user-friendly qualities.