Concrete is one of the most popular surfaces for commercial and residential use in Zebulon Georgia. Because of its durability and low maintenance, homemakers prefer it to other outdoor surface materials.
However, like everything else that is constantly exposed to adverse weather conditions, concrete deteriorates over time. Since you first installed the concrete, it looked positively new. After a few years, what was once shiny gray surface had turned into a dull, monotonous gray.
Other than tearing out the whole concrete surface and replacing it with a new one (which can be an expensive endeavor, not to mention physically taxing), your other option is patio concrete staining. Hiring a professional decorative concrete contractor in Zebulon to repair and resurface the concrete if it needs it is well worth the money.
Once the concrete is ready for its first application you have to choose from either acid stains or acrylic stains. Both can greatly enhance the appearance of your concrete surfaces. However, each stain type has its own character and distinction from the other, so it is best if you get to know what the strong and weak points of each type are before making a decision.
What makes outdoor concrete staining using acid stains unique is that every acid type reacts different to the free lime. So you can create different effects, producing an illusion of variety on your surfaces.
The other type of stain used for outdoor concrete staining is acrylic. Because acrylic stains are water-based, the pigments tend to enter through the pores of the concrete surface. In this way, the color, which is characteristically semi-translucent adheres to the concrete in a way that acid stains never do, creating a more lasting and consistent coloring.
The good thing about acrylic stains for outdoor concrete staining is that they can mask any flaws or inconsistencies in the surface. Acid stains, on the other hand, tend to accentuate them.
Repairing Broken Concrete
Repairing small cracks in Concrete
Clean out the crack with a wire brush to remove dirt and loose stones. Wash the crack with a concrete cleaner. Get commercially available nonacid concrete cleaner made by the same company that makes your patching compound. It is safer and more convenient than the large of muriatic acid masons might use.
Let the surface dry. If the crack is deep and it is in a floor, fill it partially with sand, leaving an opening about 1/4 to 1/2 inch deep. Pour in the crack sealer until it forms a layer 1/4 inch deep. Let it dry overnight and then apply another layer. Repeat until the surface is flush with the floor. Do not overfill, apply enough patch material to bring the surface flush with the floor. If using caulk, smooth with a metal putty knife.
On deeper cracks, mix some sand mix according to the direction on the bag. Trowel it into the cracks, filling it flush with the surface. First, the patch on both deep and shallow cracks will have a watery sheen. When the sheen dries off, se a wooden float to smooth the surface and give it a texture that matches the rest of the concrete. If the existing concrete is very smooth, then smooth the surface with a metal finishing trowel.
Flooring is one of the significant decisions to take for the commercial business, any industrial sector as well as a house. Tough every type of flooring material has the advantages and disadvantages, but an individual must choose the best after researching about that flooring panel properly. Making a thorough research from the various websites is a smart option for everyone who desires to install the floorings or tiles.
Amongst various types of floorings, the Epoxy floors offer some great benefits in the cost effective way. The Epoxy coating is the flooring surface, which is made up of the multiple layers of the material applied to your basement. This material is made up of the hardeners and resins.
Knowing about the material in detail
This is particular flooring, which is basically a way of protecting and sealing the concrete bases. The coating can easily provide a shiny and glossier look to the room. This is created when the defensive resin is actually applied over the top of the existing concrete slab. This resin is proper and clear, and it will generate the glossy but non-slip surface. All these sorts of resins are frequently used over floorings such as marble and terrazzo.
Durable, hard-working and affordable floors are the general choice amongst cafes, restaurants, shopping centers, shops, and other retail spaces. It basically looks quite great and can take the high amount of traffic. As a matter of fact, this is also quite easy to clean up when some things go wrong. This material is quite stylish and it provides a beautiful look to your house as well as other places. Selecting the colored aggregate mix or any other designer flooring choices can easily create the extensive variety of different finishes.