Concrete is one of the most popular surfaces for commercial and residential use in Roswell Georgia. Because of its durability and low maintenance, homemakers prefer it to other outdoor surface materials.
However, like everything else that is constantly exposed to adverse weather conditions, concrete deteriorates over time. Since you first installed the concrete, it looked positively new. After a few years, what was once shiny gray surface had turned into a dull, monotonous gray.
Other than tearing out the whole concrete surface and replacing it with a new one (which can be an expensive endeavor, not to mention physically taxing), your other option is patio concrete staining. Hiring a professional decorative concrete contractor in Roswell to repair and resurface the concrete if it needs it is well worth the money.
Once the concrete is ready for its first application you have to choose from either acid stains or acrylic stains. Both can greatly enhance the appearance of your concrete surfaces. However, each stain type has its own character and distinction from the other, so it is best if you get to know what the strong and weak points of each type are before making a decision.
What makes outdoor concrete staining using acid stains unique is that every acid type reacts different to the free lime. So you can create different effects, producing an illusion of variety on your surfaces.
The other type of stain used for outdoor concrete staining is acrylic. Because acrylic stains are water-based, the pigments tend to enter through the pores of the concrete surface. In this way, the color, which is characteristically semi-translucent adheres to the concrete in a way that acid stains never do, creating a more lasting and consistent coloring.
The good thing about acrylic stains for outdoor concrete staining is that they can mask any flaws or inconsistencies in the surface. Acid stains, on the other hand, tend to accentuate them.
Everything You Need To Know About Concrete Overlays And Stamping
Concrete stamping has been known to be one of the best ways one can use to decorate their concrete structures. However, the concrete stamping cost can vary from one design to another. There are different designs and colors one can use for concrete stamping. They can range from a few hundred dollars to thousands of dollars.
There are very many factors that will contribute to the concrete stamping cost. Some of the factors are the ones that are listed below. Weather should be something that you should be keen on. This is because rain can ruin the concrete stamping process that you are undertaking. Be sure to have a rough idea of the weather for the days to come.
Cement should be used on a minimum of five sacks. Use of less cement will lead to poorly stamped concrete. The job may then have to be redone to improve its outlook. The redoing will mean greater expenses than normal.
If you are not going to do the job yourself, make sure that you hire decorative concrete professionals in [post_name], who have experience in this line of work. They will be able to tell you where to buy the necessary materials at competitive market prices. They will also be able to guide you on what amount of items such as hardeners or paints so that you do not purchase materials that will not be needed. You will find that the concrete stamping cost can be able to be reduced significantly with proper planning and use of the above mentioned steps.
Concrete Repairs - How to Go About It
Repairing small cracks in Concrete
Clean out the crack with a wire brush to remove dirt and loose stones. Wash the crack with a concrete cleaner. Get commercially available nonacid concrete cleaner made by the same company that makes your patching compound. It is safer and more convenient than the large of muriatic acid masons might use.
Let the surface dry. If the crack is deep and it is in a floor, fill it partially with sand, leaving an opening about 1/4 to 1/2 inch deep. Pour in the crack sealer until it forms a layer 1/4 inch deep. Let it dry overnight and then apply another layer. Repeat until the surface is flush with the floor. Do not overfill, apply enough patch material to bring the surface flush with the floor. If using caulk, smooth with a metal putty knife.
On deeper cracks, mix some sand mix according to the direction on the bag. Trowel it into the cracks, filling it flush with the surface. First, the patch on both deep and shallow cracks will have a watery sheen. When the sheen dries off, se a wooden float to smooth the surface and give it a texture that matches the rest of the concrete. If the existing concrete is very smooth, then smooth the surface with a metal finishing trowel.